226 Transistor CPU Full Compatible with S7 200 CPU with Low Price

• Customization: Available
• Task: Program
• Structure: Combination
• Model NO.: UN 216-2BD23-0XB8
• Mathematical Model: Linear
• Signal: Continuous
• Function: Automatic Control, Measurement
• Certification: RoHS, ISO: 9001, CE
• Condition: New
• Customized: Non-Customized
• Material: Plastics
• Transport Package: Carton
• Specification: 196× 80× 62196× 80× 62
• Trademark: UniMAT
• Origin: China

Product Description

Technical parameters

Technical specifications
Model	CPU226 AC/DC/Relay
Physical characteristic
Dimensions(W x H x D)(mm)	196×80×62
Power consume	17W
Memory
Program memory size	24K
Data memory	10K
I/O
Local digital inputs	24 inputs
Local digital outputs	16 outputs
Digital I/O image size	256(128 inputs/128 outputs)
Analog I/O image size	64(32 inputs/32 outputs)
expansion modules allowed (Max)	7 modules
intelligent modules allowed (Max)	7 modules
Pulse catch inputs	24
High-speed counters	6 counters total
Single phase	6 at 30KHz
Two phase	4 at 20KHz
Pulse outputs	-
General
Timer	Total number:512(1ms:8;10ms:32;100ms:472)
Counters	512
Internal memory bits stored on power down	512
Time interrupts	2 with1ms resolution
Edge interrupts	4 up and/or 4 down
Analog adjustment	2 with 8 bit resolution
Boolean execution speed	0.08µs per instruction
Real Time Clock	Built-in
Communications Built-in
Ports	3 RS-485 ports, within2 standard PPI port
PPI Baud Rates	9.6,19.2 and 187.5 Kbaud
Freeport Baud Rates	1.2kbaud to 115.2Kbps
Max. cable length per segment	With isolated repeater:1000 m up to 187.5kbaud, 1200 mup to 38.4kbaud Without isolated repeater: 50 m
Max. number of stations	32 per segment, 126 per network
Max. number of masters	32
Peer to peer(PPI Master Mode)	Yes
Power
Input voltage	85 to 264 V AC(47 to 63Hz)
Input current	60/30mA while CPU only at 120/240V AC
	200/100Ma while Max. load at 120/240V AC
Inrush current	20A at 264 V AC
Isolation(field to logic)	1500 V AC
Hold up time(loss of power)	10ms at 120/240 V AC
Sensor voltage	20.4 to 28.8 V DC
Current limit	1.5A peak,thermal limit non-destructive
Ripple noise (sensor to logic)	Less than 1 V peak-to-peak
Isolation (sensor to logic)	Not isolated
CPU Digital Input Specifications
Built-in digital inputs	24
Input type	PNP/NPN
Rated voltage	24 V DC at 4mA
Max. continuous  permissible voltage	30V DC
Surge voltage	35 V DC,0.5s
Logic "1"  voltage range	15 to 30 V DC
Logic "0"  voltage range	0 to 5 V DC
Input delay	Selectable (0.2 to 12.8ms)
Connection of 2-wire proximity sensor (Bero) Premissible leakage current (Max.)	1mA
Isolation (field to logic)	Yes
Optical galvanic	500 V AC for 1minute
Isolation groups	Refer to Wiring diagram
High Speed Counter (HSC) input rate
HSC logic level 1(15 TO 30 V DC)	20K Hz (Single phase), 10K Hz (Tow phase)
HSC logic level 1(15 TO 26 V DC)	30K Hz (Single phase), 20K Hz (Tow phase),
Inputs on simultaneously	all
Cable length Max.
Shielded	500m normal inputs, 50m HSC inputs
unshielded	300m normal inputs
CPU Digital Output Specifications
Built-in outputs	16 outputs
Output type	Dry contact
Rated voltage	24 V DC or 250 V AC
Voltage range	5 to 30 V DC or 5 to 250 V AC
Surge current (Max.)	5A for 4s at 10% duty cycle
Logic "1"  (Min)	-
Logic "0"  (Max)	-
Rated current per point(Max.)	2.0A
Rated current per common(Max)	10A
Leakage current (Max)	-
Lamp load (Max)	30W DC;200W AC
Inductive clamp voltage
On State resistance (contact)	0.2Ω(max. when new)
Isolation
Optical (galvanic, field to logic)	-
logic to contact	1500 V AC for 1 minute
Resistance (logic to contact)	100MΩ
Isolation groups	Refer to wiring diagram
Delay(Max)
Off to on	-
On to off	-
Switching	10ms
Pulse frequency (Max.)	1Hz
Lifetime mechanical cycles	10,000,000 (no load)
Lifetime contacts	100,000 (rated load)
Outputs on simultaneously	All at 60ºC (horizontal)
	All at 50ºC (Vertical)
Connecting two outputs in parallel	No
Cable Length (Shielded)	500m
Cable Length (unshielded)	150m
Order number	UN 216-2BD23-0XB8