Customization: | Available |
---|---|
Task: | Program |
Structure: | Combination |
Still deciding? Get samples of US$ 150/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product Descriptions :
1. Order Number: UN 124-2BD23-0XB0
2. Local digital Inputs & Outputs: 14DC/10DO,
3. Appropriate computering and data processing, external connection with three I/O Expansion modules, long-time data-holding on power-off,
4. Unique AES Iterative encryption algorithm,which protects clients' intellectual property,
5. Allowing up to two communication ports, both support PPI protocol.
Technical specifications |
|
Model |
CPU124-2R DC/DC/RLY |
Physical characteristic |
|
Dimensions(W x H x D)(mm) |
120.5×80×62 |
Power consume |
7W |
Memory |
|
Program memory size |
8K |
Data memory |
10K |
Back up (by Flash, no need battery) |
keep over 10 years |
I/O |
|
Local digital inputs |
14 inputs |
Local digital outputs |
10 outputs |
Digital I/O image size |
128(64 inputs/64 outputs) |
Analog I/O image size |
32(16 inputs/16 outputs) |
expansion modules allowed (Max) |
3 modules |
Pulse catch inputs |
14 |
High-speed counters |
6 counters total |
Single phase |
6 at 30KHz |
Two phase |
4 at 20KHz |
Pulse outputs |
2 at 20KHz(DC outputs only) |
General |
|
Timer |
Total number:256(1ms:4;10ms:16;100ms:236) |
Counters |
256 |
Internal memory bits stored on power down |
256 |
Time interrupts |
2 with1ms resolution |
Edge interrupts |
4 up and/or 4 down |
Analog adjustment |
2 with 8 bit resolution |
Boolean execution speed |
0.08µs per instruction |
Real Time Clock |
Built-in |
Ports |
2 RS-485 ports,witnin 1 standard PPI port |
PPI Baud Rates |
9.6,19.2 and 187.5 Kbaud |
Freeport Baud Rates |
1.2kbaud to 115.2Kbaud |
Max. cable length per segment |
With isolated repeater:1000 m up to 187.5kbaud, 1200 m up to 38.4kbaud Without isolated repeater: 50 m |
Max. number of stations |
32 per segment, 126 per network |
Max. number of masters |
32 |
Peer to peer(PPI Master Mode) |
no |
Power |
|
Input voltage |
20.4 to 28.8 VDC |
Inrush current |
12A at 28.8 VDC |
Isolation(field to logic) |
Not isolated |
Hold up time(loss of power) |
10ms at 24 VDC |
Sensor voltage |
L+ minus 5 V |
Current limit |
1.5A peak,thermal limit non-destructive |
Ripple noise (sensor to logic) |
Derived from input power |
Isolation (sensor to logic) |
Not isolated |
CPU Digital Input Specifications |
|
Built-in digital input |
14 |
Input type |
PNP/NPN |
Rated voltage |
24 VDC at 4mA |
Max. continuous permissible voltage |
30 VDC |
Surge voltage |
35 VDC for 0.5s |
Logic "1" voltage range |
15 to 30 VDC |
Logic "0" voltage range |
0 to 5 VDC |
Input delay |
Selectable (0.2 to12.8ms) |
Connection of 2-wire proximity sensor (Bero) Premissible leakage current (Max.) |
1mA |
Isolation (field to logic) |
Yes |
Optical galvanic |
500 VAC for 1minute |
High-speed Counters |
single-phase 2 pcs 20K(I0.0 I0.1) |
Cable length Max. |
|
Shielded |
500m normal inputs, 50m HSC inputs |
unshielded |
300m normal inputs |
CPU Digital Output Specifications |
|
Built-in outputs |
10 outputs |
Output type |
Dry contact |
Rated voltage |
24 VDC or 250V AC |
Voltage range |
5-30V DC,5-250V AC |
Surge current (Max.) |
5A 4s at 10% duty cycle |
Logic "1" (Min) |
- |
Logic "0" (Max) |
- |
Rated current per point(Max.) |
2A |
Rated current per common(Max) |
8A |
Leakage current (Max) |
- |
Lamp load (Max) |
30W DC,200W AC |
Inductive clamp voltage |
- |
On State resistance (contact) |
0.2Ω |
Isolation |
Relay Isolation |
Pulse frequency (Max.) |
1Hz |
Lifetime mechanical cycles |
10000000(no load) |
Lifetime contacts |
100000(Rated load) |
Outputs on simultaneously |
All at 60ºC(horizontal) |
All at 50ºC (Vertical) |
|
Connecting two outputs in parallel |
Yes, only outputs in same group |
Cable Length (Shielded) |
500m |
Cable Length (unshielded) |
150m |
Order number |
UN 124-2BD23-0XB0 |